1、確定你的telnet服務打開沒有：

[root@111 ~]# chkconfig --list|grep telnet

ekrb5-telnet: off

krb5-telnet: off

[root@111 ~]#

注意檢查結果這里是關閉狀態

2、打開telnet服務：

[root@111 ~]# chkconfig krb5-telnet on

[root@111 ~]# chkconfig --list|grep telnet

ekrb5-telnet: offv

krb5-telnet: on

[root@111 ~]#

檢查已經被打開了

3、修改登陸文件securetty,主要增加要登陸的終端點

[root@111 ~]# vi /etc/securetty

增加如下幾行：

pts/1

pts/2

pts/3

pts/4

pts/5

……

保存退出即可。

如果是chkconfig krb5-telnet on

會提示Unencrypted connection refused. Goodbye.Connection closed by foreign host.看錯誤信息好像是說的為加密的連接被拒絕，查看了他的配置文件也沒發現有什么關于加密的選項，而且配置文件也很正確，于是到google上去搜索了一大圈，最后終于找到一個老外寫的一個解決方法：

I really needed a bit of guidance and you PRovided it./sbin/chkconfig --list |grep telnetThe above command told me I had both krb5-telnet and ekrb5-telnet, andalso the installed telnet all on. Initially I did not know what theywere all for. After turning them on and off and testing my telnetconnection from another box I realised that "ekrb5-telnet" was theencrypted telnet server that I needed to turn off to run "krb-telnet"which allowed non-encrypted telnet connections.eg /sbin/chkconfig ekrb5-telnet offThanks for your help.
 

原來ekrb5-telnet是一個需要加密的telnet服務，把這個服務啟動上當然就需要加密了。解決方法：將/etc/xinetd.d/ekrb5-telnet里面的disable改成=yes，再重啟xinetd服務service xinetd restart就OK了！